Alloy: J24054
Select a Cast Grade
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
MT Grade: WC 6
Similar Specifications
Cast UNS: J24054
Cast Grade: 10B
Cast ASTM: A217
Typical Chemical Composition (% by wt.)
C Max: 0.05-0.20
Cr: 1.00-1.50
Mn: 0.50-0.80
Si: 0.60
Other: Mo 0.45-0.65
Minimum Mechanical Properties
Tensile, ksi: 70-95
Tensile, MPa: 480-655
Yield, ksi: 40
Yield, MPa: 275
Elongation %: 20
Brinell Typical: 285
Heat Treatment: NORM AND TEMPER
Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.
