Alloy: N07718
Select a Cast Grade
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
MT Grade: MTEK 718
Similar Specifications
Cast UNS: N07718
Cast ASTM: NACE MR0175
Wrought UNS: N07718
Wrought Grade: INCONEL® 718
Typical Chemical Composition (% by wt.)
C Max: 0.02-0.08
Cr: 17-21
Ni: 50-55
Other: Mo 2.8-3.3; Nb 4.75-5.50 + Fe, Ti, AI, Co, OTHERS
Minimum Mechanical Properties
Tensile, ksi: 125
Tensile, MPa: 860
Yield, ksi: 110
Yield, MPa: 760
Elongation %: 5
Brinell Typical: 352
Heat Treatment: SOL. ANNEAL AND AGE
Inconel® trademark of Special Metals
Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.
