Alloy: N30002
Select a Cast Grade
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
MT Grade: MTEK CW-12MW
Similar Specifications
Cast UNS: N30002
Cast Grade: CW-12MW
Cast ASTM: A494
Wrought UNS: N10276
Wrought Grade: HASTELLOY® C-276
Typical Chemical Composition (% by wt.)
C Max: 0.12
Cr: 15.5-17.5
Ni: BAL
Mn: 1.00
Si: 1.00
Other: Mo 16 -18; Fe 4.5-7.5; W 3.75-5.25; V 0.20-0.40
Minimum Mechanical Properties
Tensile, ksi: 72
Tensile, MPa: 495
Yield, ksi: 40
Yield, MPa: 275
Elongation %: 4
Heat Treatment: SOL. ANNEAL
Hastelloy® trademark of Haynes International
Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.
