Alloy: J92900
Select a Cast Grade
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
MT Grade: MTEK 316
Similar Specifications
Cast UNS: J92900
Cast Grade: CF8M
Cast ASTM: A351, A743, A744
Military / AMS: 5361 (AMS specifying centrifugal casting)
Wrought UNS: S31600
Wrought Grade: 316
Typical Chemical Composition (% by wt.)
C Max: 0.08
Cr: 18-21
Ni: 9-12
Mn: 1.50
Si: 1.50
Other: Mo 2-3
Minimum Mechanical Properties
Tensile, ksi: 70
Tensile, MPa: 485
Yield, ksi: 30
Yield, MPa: 205
Elongation %: 30
Brinell Typical: 179
Heat Treatment: SOL. ANNEAL
Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.
