Alloy: J32550
Select a Cast Grade
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
MT Grade: FERRALIUM® 255
Similar Specifications
Cast UNS: J32550
Wrought UNS: S32550
Wrought Grade: FERRALIUM® 255
Chemical Composition (% by wt.)
C Max: 0.04
Cr: 24-27
Cu: 1.00-2.50
Ni: 4.5 - 7.5
Mn: 2.00
Si: 1.00
Other: Mo 2.7-3.9; N 0.10 MIN; S 0.03; P 0.04
Mechanical Properties
Tensile, ksi: 100
Tensile, MPa: 690
Yield, ksi: 65
Yield, MPa: 450
Elongation %: 20
Brinell Typical: 241
Heat Treatment: SOL. ANNEAL
Produced under license of Langley Alloys
Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.
