Alloy: J82090
Select a Cast Grade
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
MT Grade: MTEK 220-01 / 222-01
Similar Specifications
Cast UNS: J82090
Cast Grade: C12
Cast ASTM: A 217
Wrought UNS: S50400
Wrought Grade: P9
Typical Chemical Composition (% by wt.)
C Max: 0.20
Cr: 8.00-10.00
Ni: 0.50 MAX
Mn: 0.35-0.65
Si: 1.00
Other: Mo 0.90 - 1.20; Cu 0.50 MAX; W 0.10 MAX
Minimum Mechanical Properties
Tensile, ksi: 90
Tensile, MPa: 620
Yield, ksi: 60
Yield, MPa: 415
Elongation %: 18
Heat Treatment: NORMALIZE AND TEMPER
Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.
