Alloy: J91150
Select a Cast Grade
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
MT Grade: MTEK 410
Similar Specifications
Cast UNS: J91150
Cast Grade: CA15
Cast ASTM: A743, A487, A217
Military / AMS: 5351 (AMS specifying sand casting)
Wrought UNS: S41000
Wrought Grade: 410
Typical Chemical Composition (% by wt.)
C Max: 0.15
Cr: 11.5-14.0
Ni: 1.00 MAX
Mn: 1.00
Si: 1.50
Minimum Mechanical Properties
Tensile, ksi: 90
Tensile, MPa: 620
Yield, ksi: 65
Yield, MPa: 450
Elongation %: 18
Brinell Typical: 207
Heat Treatment: ANNEAL/NORM AND TEMPER
Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.
