Alloy: J92240
Select a Cast Grade
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
MT Grade: 14-4 PH®
Similar Specifications
Cast UNS: J92240
Cast Grade: 14-4 PH
Military / AMS: 5340
Typical Chemical Composition (% by wt.)
C Max: 0.06
Cr: 13.50-14.25
Cu: 3.0-3.5
Ni: 3.75-4.75
Mn: 0.70
Si: 0.50-1.00
Other: Nb 0.15-0.35; Mo 2.0-2.5; Ta 0.05 MAX; N 0.05 MAX
Minimum Mechanical Properties
Tensile, ksi: 150
Tensile, MPa: 1030
Yield, ksi: 130
Yield, MPa: 895
Elongation %: 10
Brinell Typical: 286
Heat Treatment: HOMOG, SOLUTION, AGE
Produced under license of ARMCO Advanced Materials Corp.
Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.
