Alloy: N08007
Select a Cast Grade
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
or Select a Wrought Grade
or Select Cast UNS From the Following Categories
MT Grade: MTEK 20
Similar Specifications
Cast UNS: N08007
Cast Grade: CN7M
Cast ASTM: A351, A743, A744
Wrought UNS: N09020
Wrought Grade: 20Cb-3®
Typical Chemical Composition (% by wt.)
C Max: 0.07
Cr: 19-22
Cu: 3-4
Ni: 27.5-30.5
Mn: 1.50
Si: 1.50
Other: Mo 2-3
Minimum Mechanical Properties
Tensile, ksi: 62
Tensile, MPa: 425
Yield, ksi: 25
Yield, MPa: 170
Elongation %: 35
Brinell Typical: 156
Heat Treatment: SOL. ANNEAL
Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.
