|
Horizontal and Vertical Centrifugal Casting Manufacturer
Typical Products
- Bushings / Bearings
- Gear blanks
- Continuous Cast products
- Jet engine compressor cases
- Tube assemblies, coils, manifolds
- Wear Rings
|
Typical applications
- Naval / Marine
- Centrifuges
- Jet Engines
- Hydro Electric power
- Aerospace
- Petro Chemical processing
|
Wisconsin Centrifugal Quality Assurance:
 Tightly controlled manufacturing processes ensure product integrity- Our management systems are certified for product use in many of the most demanding applications
- Expertise in Non-Destructive Evaluation and product traceability from raw material through machining lets you choose Wisconsin Centrifugal as your preferred vendor with confidence.
- We were the first centrifugal casting foundry to earn the AMSE Quality System (Materials) Certificate, and were the first domestic foundry to earn ISO 9002.
- Fully integrated centrifugal casting, rough machining, finish machining, fabrication, and heat treat operation.
- Products and processes are continuously improved through the use of Lean Sigma.
Net-formed centrifugal castings
dramatically reduce machining cost. |
Furnace tubes for petrochemical
are cast, machined and assembled. |
Cast formed windows virtually
eliminate customer scrap. |
Wisconsin Centrifugal Capabilities
Alloys
- Bronze Alloy
- Al Alloy
- Gear Alloy
- Bearing Alloy
- Nickel-Silver Alloy
- Mg Alloy
|
High Conductivity
- Copper Alloy
- Stainless Steel Alloy
- Austenitic Alloy
- Super Austenitic Alloy
- Duplex Alloy
- Martensitic Alloy
- Heat Resistant Alloy
- Severe Corrosion Alloy
- Heat Resistant Nickel Copper Alloy
- Cobalt Based Alloy
|
Through Wisconsin Centrifugal’s 60+ year history, we have provided the market with a unique blend of quality and value.
Our products are recognized in more than 25 countries around the world for their outstanding performance in demanding applications.
Certifications
- ISO 9001:2000 / ANSI / ASQC Q90
- ISO 17025
- ]AS 9100
- Nuclear ASME Section III
- MIL-I-45208A
- NADCAP
- Welding to ASME Section IX
- Welding to MIL Std 248
- Heat treat to Mil H-6875F
Contact Us about Vertical Centrifugal Casting and Horizontal Centrifugal Casting by Clicking Here
Centrifugal Castings l Continuous Castings l Investment Castings l Sand Castings l Cast Furnace Tubes l Compressor Cases l Shaft Sleeves l Bronze Bushings l Bronze Wear Plates l Cast Alloys
Metaltek International is a Horizontal and Vertical Centrifugal Casting Manufacturer
|
|
