Alloy Grade UNS: C95900 – Excellent Wear Properties 

  • Overview

    This alloy is frequently specified for applications that require excellent wear properties because of its increased aluminum and iron content. This alloy has excellent wear and anti-galling properties when used in forming, bending and drawing dies, particularly in working stainless steel. It is also a successful replacement for hardened steel in special applications.

  • Typical Uses

    A good material for forming rolls, draw dies, die inserts, and rings. Also used for bushings and machine tool parts.

  • MetalTek Grade

    MTEK 275

Similar Specifications

Cast UNS: C95900

Cast Grade: C95900

Cast ASTM: B271, B505, B148

Typical Chemical Composition (% by wt.)

Aluminum: 13

Carbon: n/a

Chromium: n/a

Manganese: n/a

Iron: 4.5

Copper: BAL

Nickel: n/a

Lead: n/a

Tin: n/a

Silicon: n/a

Zinc: n/a

Minimum Mechanical Properties

Brinell 3000 KG Min

0

Brinell 3000 KG Typical:

0

Tensile, ksi

0

Tensile, MPa

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the MetalTek family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.