Alloy Grade UNS: N-12MV – Nickel-Molybdenum Alloy

  • Overview

    N30012 is a nickel-molybdenum alloy suited for handling hydrochloric acid in all concentrations and temperatures to the boiling point. Its excellent strength and ductility at both room and elevated temperatures make it a valuable high temperature alloy. It can be used up to 1400 degrees Fahrenheit (760 degrees Celsius) under oxidizing conditions and substantially higher in reducing atmospheres. Also known as MTEK N-12MV, this alloy is machinable and weldable.

  • Typical Uses

    Gas turbine engine components and chemical processing equipment.

  • MetalTek Grade

    MTEK N-12MV

Similar Specifications

Cast UNS: N30012

Wrought UNS: N10665

Cast Grade: N-12MV

Cast ASTM: A494

Military/AMS: AMS 5396

* AMS specifying investment casting.

Typical Chemical Composition (% by wt.)

Aluminum: n/a

Carbon: 0.12

Chromium: 1

Manganese: 1

Iron: 4.0-6.0

Copper: n/a

Nickel: BAL

Lead: n/a

Tin: n/a

Silicon: 1

Zinc: n/a

Other: Mo 26-30; V 0.20-0.60

Minimum Mechanical Properties

Tensile, ksi

0

Tensile, MPa

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

Heat Treatment: Solution Anneal

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the MetalTek family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.