Alloy Quick Finder Results

Enter all or part of a Alloy cast number and we'll deliver the most relevant results!

Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.

Cast Grade: CB7Cu-1

Produced under license of ARMCO Advance Materials Corp.

OVERVIEW: Extremely high strength stainless steels that are more corrosion resistant than 400-series martensitics.

TYPICAL USES: Aerospace, chemical and food processing equipment, cylinders, gears, hollow shafts, landing gears, marine gas turbine, nuclear flow control, pump and valve components, pressure vessels, shaft sleeves, turbine engine parts.

MetalTek Grade: 17-4PH®

Similar Specifications

Cast UNS: J92180

Cast Grade: CB7Cu-1


Wrought UNS: S17400

Wrought Grade: 17-4PH

Military / AMS: MIL-S-81591, IC-17-4 (INVEST) I; AMS 5355, 17-4PH (INVEST), AMS 5398, 17-4PH (C, S)

Typical Chemical Composition (% by wt.)

Cr: 15.50 - 17.50

Cu: 2.50 - 3.20

Fe: Bal

Mn: 0.70 max

Ni: 3.60 - 4.60

Si: 1.00 max

C Max: 0.07 max

Other: Nb (Cb) 0.15 - 0.35

Minimum Mechanical Properties

Brinell Typical: varies

Tensile, ksi: varies

Tensile, MPa: varies

Yield, ksi: varies

Yield, MPa: varies

Elongation %: varies

Heat Treatment: Homogenized, Solutioned and Aged

properties vary with aging treatment