Alloy Quick Finder Results

Enter all or part of a Alloy cast number and we'll deliver the most relevant results!

Disclaimer: The data and information here are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. MetalTek International , its companies or businesses, makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special or consequential damages therefrom. This material is subject to revision without prior notice.


OVERVIEW: "400" series materials are general high strength corrosion resistant alloys.

TYPICAL USES: Aerospace, bearings, bushings, chemical and food processing equipment, conveyor rollers, cutlery, impellers, medical devices, pump and valve components, turbine engine parts.

MetalTek Grade: MTEK M152

Similar Specifications

Wrought UNS: S64152

Typical Chemical Composition (% by wt.)

Cr: 11.0 - 12.75


Mn: 0.50 - 0.90

Ni: 2-3

Si: 0.30

C Max: 0.10 - 0.17

Other: Mo 1.5-2.0; V 0.25-0.40

Minimum Mechanical Properties

Brinell Typical: 330

Tensile, ksi: 150

Tensile, MPa: 1035

Yield, ksi: 120

Yield, MPa: 830

Elongation %: 13

Heat Treatment: Harden and Tempered