Alloy Grade UNS: C92700 – Leaded Tin Bronze

  • Overview

    C92700 is a specialized leaded tin bronze formulated for optimal performance in continuous casting processes. The addition of lead enhances its fluidity and castability, allowing for the efficient production of long, complex shapes with smooth surfaces and consistent quality. This alloy's inherent strength and wear resistance further contribute to its suitability for continuous casting, ensuring the production of high-quality components with excellent dimensional accuracy and structural integrity.

  • Typical Uses

    Gears, fittings, bearings, bushings, pump components.

  • MetalTek Grade

    LEADED TIN BRONZE

  • Poured At:

    Wisconsin Centrifugal Division

Similar Specifications

Cast UNS: C92700

Cast Grade: C92700

Cast ASTM: B505

Typical Chemical Composition (% by wt.)

Aluminum: 0.005

Carbon: n/a

Chromium: n/a

Manganese: n/a

Iron: 0.2

Copper: 87.5

Nickel: 1

Lead: 1.8

Tin: 10

Silicon: 0.005

Zinc: 0.7

Other: P 0.25; S 0.05; Sb 0.25

Minimum Mechanical Properties

Tensile, ksi

0

Tensile, MPa

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the MetalTek family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.