Alloy Grade UNS: ALLOY 230 – Extreme Heat

  • Overview

    Alloy 230 is known for extreme heat and corrosion services. It is easy to form and cast. Also known as N06230 in wrought form, it has good ductility and lower thermal expansion when compared to other high-temp alloys. It contains up to 24% chromium and up to 15% tungsten.

  • Typical Uses

    Chemical and food processing equipment, heat treat equipment and calciner components, turbine engine parts.

  • MetalTek Grade

    ALLOY 230

Similar Specifications

Wrought UNS: N06230

Typical Chemical Composition (% by wt.)

Aluminum: n/a

Carbon: 0.05-0.09

Chromium: 20-24

Manganese: 1

Iron: n/a

Copper: n/a

Nickel: BAL

Lead: n/a

Tin: n/a

Silicon: 0.25-0.75

Zinc: n/a

Other: W 13 -15; Mo 1-3; Fe; Co; AI; La; Ti

Minimum Mechanical Properties

Tensile, ksi

0

Tensile, MPa

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

Heat Treatment: Solution Anneal

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the MetalTek family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.