Alloy Grade UNS: N06635 – Extreme Heat, Corrosion

  • Overview

    N06635 is a nickel-based superalloy specifically engineered to withstand extreme conditions involving both high temperatures and corrosive environments. This alloy exhibits exceptional resistance to oxidation, carburization, and other forms of high-temperature degradation, making it suitable for demanding applications where components are exposed to extreme heat and corrosive gases. N06635 maintains its strength and structural integrity even under prolonged exposure to elevated temperatures, ensuring reliable performance in challenging conditions. This combination of high-temperature resistance and corrosion resistance makes N06635 a valuable choice for industries such as aerospace, chemical processing, and power generation, where materials must withstand extreme environments.

  • Typical Uses

    Chemical and food processing equipment, heat treat equipment, calciner components, and turbine engine parts.

  • MetalTek Grade

    ALLOY S

  • Poured At:

    Wisconsin Centrifugal Division, Wisconsin Investcast Division

Similar Specifications

Cast UNS: N06635

Wrought UNS: N06635

Cast Grade:

Typical Chemical Composition (% by wt.)

Aluminum: n/a

Carbon: 0.02

Chromium: 14.5-17.0

Manganese: 0.30-1.00

Iron: n/a

Copper: n/a

Nickel: BAL

Lead: n/a

Tin: n/a

Silicon: 0.20-0.75

Zinc: n/a

Other: Mo 14.0-16.5; Fe; AI; La

Minimum Mechanical Properties

Tensile, ksi

0

Tensile, MPa

0

Calculated PREn (Minimum)

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

Heat Treatment: Solution Anneal

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the MetalTek family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.