Alloy Grade UNS: S24000 – Austenitic Stainless Steel 

  • Overview

    S24000 is an austenitic stainless steel that offers a compelling combination of strength, toughness, and ductility. This alloy exhibits high yield strength, making it capable of withstanding significant loads without permanent deformation. Its excellent toughness allows it to absorb impact energy and resist fracture, while its good ductility enables it to be formed and shaped without cracking. This balance of properties makes S24000 a versatile choice for applications requiring a combination of strength, toughness, and formability, particularly in environments where components may be subjected to both stress and impact.

  • Typical Uses

  • MetalTek Grade

    NITRONIC® 33

  • Poured At:

    Wisconsin Centrifugal Division, Wisconsin Investcast Division

* Produced under license of AK Properties / ARMCO Advance Materials Corp.

Similar Specifications

Wrought UNS: S24000

Wrought Grade: NITRONIC® 33

Typical Chemical Composition (% by wt.)

Aluminum: n/a

Carbon: 0.08

Chromium: 17-19

Manganese: 11.5-14.5

Iron: n/a

Copper: n/a

Nickel: 2.25-3.75

Lead: n/a

Tin: n/a

Silicon: 1

Zinc: n/a

Other: N 0.20-0.40

Minimum Mechanical Properties

Tensile, ksi

0

Tensile, MPa

0

Calculated PREn (Minimum)

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

Heat Treatment: Solution Anneal

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the MetalTek family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.