Blog How To Choose a Metal Casting Supplier for the Petrochemical Industry

By: Robb Edwards

Planned turnarounds are regular occurrences in the life cycle of a petrochemical plant. Every few years, a plant goes offline for a few weeks to upgrade capital equipment, perform regular maintenance, or improve worker safety. These activities cannot take place while a plant is operational. When properly executed, a planned turnaround limits the downtime and lost revenue of the plant in the short term, while increasing the long-term profitability of operations.

Unfortunately, sometimes furnaces experience an unplanned shutdown, for a variety of reasons.

MetalTek’s Wisconsin Centrifugal Division serving a hydrogen reformer shutdown in the 1980s

Mechanical failure, electrical outage, loss of steam, fire, and other factors can cause an unplanned shutdown for a petrochemical plant. Lost revenue can amount to millions of dollars per day, leaving the plant with little time to replace any needed equipment and resume operations to meet annual production expectations.

Whether a planned turnaround or an unplanned shutdown, there are several factors that a plant operator or owner should consider when evaluating metal casting suppliers. These factors are especially critical when a quick response is required to provide new petrochemical tubes, coils, fittings, or tube supports.

Does The Metal Casting Supplier Have Significant Petrochemical Experience?

Time is critical during a turnaround or shutdown. An experienced metal casting supplier will provide a detailed drawing of the products, cost, and a production plan. All levels of the metal casting organization should have petrochemical experience, including sales, metallurgy, plant engineering, foundry, machining, fabrication, and shipping.

Typical Petrochemical Experience Includes:

Typical Petrochemical Products Offered Include:

  • Bullhead tees
  • Catalyst tubes, reformer tube assemblies, or steam reformer assemblies
  • Convection and radiant section tubes supports, or radiant tube trees
  • Return bends
  • Ethylene cracker tubes and fittings, ethylene coils, or pyrolysis coils
  • Heater hardware
  • Manifold tubes and assemblies
  • Pyrolysis furnace coils
  • Radiant sections
  • Wye fittings
  • Reformer Tubes

Such broad application and product experience will result in the ability to anticipate challenges and provide a complete and coordinated turnkey solution for turnarounds and shutdown. This limits plant downtime and lost revenue.

Does The Company Have a Full Range of Metal Casting Processes?

Tube assemblies for petrochemical furnace installations can be a fabricated combination of centrifugal castings, sand castings, and investment castings. Because these assemblies operate in high temperatures over long periods of time, quality assurance is essential. This quality assurance will come from a fully integrated supplier of components for high-temperature applications that has in-house fabrication and testing capabilities. This full range of capabilities will simplify the process and ensure that you get your high-quality parts as quickly as possible. Why use two or more metal casting suppliers for one petrochemical assembly when time and inconsistent quality are what you can least afford?

Ethylene Cracking Coil Fabricated
Ethylene cracking coil provided by MetalTek includes centrifugally-casted tubes from Wisconsin Centrifugal and sand-casted fittings from Carondelet

Does The Metal Casting Supplier Have a Broad Selection of Heat-Resistant Alloys?

Simply put, the right alloy extends product life. Several alloy families are capable of being used at temperatures above 1650⁰ Fahrenheit (898⁰ Celsius) with acceptable levels of stress rupture and creep strength and are therefore ideally suited for petrochemical applications.

  • Chrome nickel austenitic alloys (heat-resistant stainless alloys)
  • Nickel-based alloys
  • Cobalt chrome nickel-based alloys

For example, petrochemical manifolds are traditionally made from wrought alloy 800H. However, an alloy such as MetalTek’s MTEK SUPER 20-32Nb offers creep resistance superior to the wrought alloy while retaining excellent aged ductility. Experienced metallurgists supported by a broad selection of alloys can quickly make specific recommendations to eliminate future rapid shutdowns due to equipment failure in the high-heat, high-wear, and high-corrosion environment of a petrochemical plant.

What Are the Machining And Fabrication Capabilities Of The Supplier?

The ability for a metal casting company to machine and fabricate petrochemical assemblies on-site will simplify operations and save valuable time compared to using a third party once the products are cast. This kind of metals partner will have experience fabricating assemblies using centrifugal castings, investment castings, and sand castings, which should result in a superior product requiring less long-term maintenance.

Wisconsin Centrifugal Petrochemical Fabrication
The petrochemical fabrication facility at MetalTek’s Wisconsin Centrifugal Division

What Are The Shipping Capabilities Of The Supplier?

Shipping petrochemical tubes or assemblies is a complex operation. First, it is necessary to procure appropriate packaging that must be able to withstand the physical demands of long travel. Second, a metals partner must have relationships with third party logistics (3PL) firms that can ship the products for prompt delivery at a competitive price.

A supplier with experience servicing petrochemical customers in multiple countries across the world will have the scale required to quickly respond to the immediate needs of a petrochemical rapid shutdown.

Summary

Limiting downtime and lost revenue is paramount for a turnaround or shutdown. A metal casting supplier needs to have significant petrochemical industry experience to quickly respond to your needs and anticipate product challenges.

The supplier also needs to be able to recommend specific alloys that will extend product life in the high-heat and high-wear environment of a petrochemical plant, eliminating future unplanned shutdowns due to equipment failure.

Finally, a full range of metal casting processes including centrifugal, investment, and sand combined with in-house machining and fabrication capabilities will allow the metal casting supplier to provide the highest measure of testing and quality assurance in the least amount of time.

Centrifugal Casting
Casting a petrochemical tube at Wisconsin Centrifugal

MetalTek International has significant experience in providing solutions for petrochemical rapid shutdowns. Recently, a customer in South America experienced a major failure in its primary hydrogen reformer that left it unable to process crude oil into fuel. MetalTek accepted the challenge of delivering 200 complete reformer tubes in only five weeks.

There were hundreds of centrifugal castings to pour, test, machine, and inspect prior to final fabrication. The customer had its choices of metal casting suppliers, but selected MetalTek because of its fair price, complete range of capabilities, and rich history of rapidly responding to customers.

Planned turnaround or unplanned shutdown, give MetalTek a call by phone or submit a request for quote through MetalTek.com. Our petrochemical team will be ready for the challenge.

Have questions?

Download Our Alloy Guide

Download Our Where Used Guide

Related Blogs

Follow Us